Suche
    en
    2130
    STEGO Electronic thermostat with integrated switch module DCT 010

    ELECTRONIC THERMOSTAT

    DCT 010 | DC 20 V to 56 V
    Electronic thermostat with integrated switch module for regulating DC-powered devices in enclosures and control cabinets. Switches all common consumers inside control cabinet applications: heaters, fans, signal devices, etc. Contact maker versions (NO) in two versions with broad range of temperature settings. Contact breaker versions (NC) with secondary switch function: pre-set relative humidity of 65%.
    • Internal switch module with high DC switch performance
    • Adjustable temperature
    • Small hysteresis
    • External sensor
    to product variants

    Overview Technical Data

    3 K (±1 K tolerance) at +25 °C (+77 °F), 50 % RH
    ~ 5 s
    cable 2 m with snap in connector (included in the delivery)
    contact maker NO (MOSFET) or contact breaker NC (MOSFET)
    > 100,000 cycles
    DC 20 to 56 V
    LED
    6-pole terminal: stranded wire1 1.5 mm² (AWG 16);
    max. 2.5 mm² (AWG 12)
    clip for 35 mm DIN rail, EN 60715
    plastic according to UL94 V-0, grey (bicolor)
    93 x 53 x 44 mm
    ~ 120 g (incl. sensor)
    vertical
    -40 to +80 °C (-40 to +176 °F)
    < 90 % RH (non-condensing)
    IP20
    UL File No. E164102, VDE, EAC
    other versions (e.g. setting ranges and °F) on request

    1 When connecting with stranded wires, wire end ferrules must be used.

    Product Variants

    Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
    max.     		Operating voltage
    min.     		Voltage type Frequency Heating capacity Inrush current
    max.     		Surface temperature Rec. pre-fuse
    T (time-delay)     		Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
    free flow     		Flow rate,
    with filter     		Setting range Setting range 2 Current
    consumption     		Nominal current
    of socket     		Power
    consumption     		Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
    max.     		Switching current
    min.     		Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
    Signal current     		Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
    difference     		Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
    cut-out     		Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD Inquiry CAD
    01011.0-21 plastic according to UL94 V-0, grey (bicolor) Electronic Thermostat DCT 010 Normally open(NO) 20 - 56 V 61 V 18 V DC 24 A 10 s 6-pole terminal: stranded wire 1.5 mm² (AWG 16); max. 2.5 mm² (AWG 12) -40 ─ +50 °C -10 ─ +50 °C 0.05 A 1 W -40 ─ +80 °C ≤90% rF ≤90% rF 13 A (DC) cable 2 m with snap in connector 5 s MOSFET >100.000 Zyklen LED Clip for 35 mm Rail, EN 60715 3 K ± 1 K 44 mm 53 mm 93 mm vertical 120 g IP20 VDE E342261 EAC Catalogue
    01011.0-22 plastic according to UL94 V-0, grey (bicolor) Electronic Thermostat DCT 010 Normally open(NO) 20 - 56 V 61 V 18 V DC 24 A 10 s 6-pole terminal: stranded wire 1.5 mm² (AWG 16); max. 2.5 mm² (AWG 12) -40 ─ +60 °C 0 ─ +60 °C 0.05 A 1 W -40 ─ +80 °C ≤90% rF ≤90% rF 11 A (DC) cable 2 m with snap in connector 5 s MOSFET >100.000 Zyklen LED Clip for 35 mm Rail, EN 60715 3 K ± 1 K 44 mm 53 mm 93 mm vertical 120 g IP20 VDE E342261 EAC Catalogue
    01011.0-41 plastic according to UL94 V-0, grey (bicolor) Electronic Thermostat DCT 010 Normally closed(NC) 20 - 56 V 61 V 18 V DC 24 A 10 s 6-pole terminal: stranded wire 1.5 mm² (AWG 16); max. 2.5 mm² (AWG 12) -40 ─ +50 °C -10 ─ +50 °C 65% rF 0.05 A 1 W -40 ─ +80 °C ≤90% rF ≤90% rF 13 A (DC) cable 2 m with snap in connector 5 s MOSFET >100.000 Zyklen LED Clip for 35 mm Rail, EN 60715 3 K ± 1 K 44 mm 53 mm 93 mm vertical 120 g IP20 VDE E342261 EAC Catalogue
    01011.0-42 plastic according to UL94 V-0, grey (bicolor) Electronic Thermostat DCT 010 Normally open(NO) 20 - 56 V 61 V 18 V DC 24 A 10 s 6-pole terminal: stranded wire 1.5 mm² (AWG 16); max. 2.5 mm² (AWG 12) -40 ─ +60 °C 0 ─ +60 °C 65% rF 0.05 A 1 W -40 ─ +80 °C ≤90% rF ≤90% rF 11 A (DC) cable 2 m with snap in connector 5 s MOSFET >100.000 Zyklen LED Clip for 35 mm Rail, EN 60715 3 K ± 1 K 44 mm 53 mm 93 mm vertical 120 g IP20 VDE E342261 EAC Catalogue

    Notice: Secondary switching function: Versions with secondary switching function can also register the humidity and therefore offer an additional protection for electronics. Switch difference: 4% RH (+1% tolerance) at +25°C (+77°F), 50 % RH

    Summary of your request

    Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
    max.     		Operating voltage
    min.     		Voltage type Frequency Heating capacity Inrush current
    max.     		Surface temperature Rec. pre-fuse
    T (time-delay)     		Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
    free flow     		Flow rate,
    with filter     		Setting range Setting range 2 Current
    consumption     		Nominal current
    of socket     		Power
    consumption     		Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
    max.     		Switching current
    min.     		Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
    Signal current     		Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
    difference     		Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
    cut-out     		Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD
    Send your selected items as an enquiry

    Your product inquiry
    Icon-Heizen Heating
    Icon-Kuehlen Cooling
    Icon-Regeln Regulating
    Icon-Beleuchten Lighting
    Start inquiry now

    Your direct contact

    +49 (0)791 95058-0
    info@stego.de

    STEGO Elektrotechnik GmbH
    Kolpingstraße 21
    74523 Schwäbisch Hall
    Germany

    Stego Worldwide

    Stego-Weltweit-Karte
    To the branches & dealers
    Start inquiry now