CR 030 | 950 W

CR 030 enclosure heater with fan by STEGO

2011_05_CR030_CR130_CS030_CS130_ConnectionExample

ENCLOSURE HEATER WITH FAN

CR 030 | 950 W

Downloads

Datasheet

Operating Instructions

to product variants

Overview Technical Data

Heating element

high performance cartridge

Temperature safety cut-out

with automatic reset and second-tier one shot fuse
to protect against overheating in case of fan failure

Heater body

extruded aluminium profile

Axial fan, ball bearing

airflow 160 m³/h, free flow
service life 50,000 h at +25 °C (+77 °F)

Connection

2-pole max. 2.5 mm², clamping screw with strain relief,
torque 0.8 Nm max.

Casing

plastic according to UL94 V-0, black

Mounting

screw fixing (M5)

Fitting position

vertical airflow (air outlet up)

Dimensions

168 x 145 x 100 mm

Weight

~ 1,4 kg

Operating¹/Storage temperature

-45 to +70 °C (-49 to +158 °F)

Operating/Storage humidity

< 90 % RH (non-condensing)

Protection type/Protection class

IP20 / II (double insulated)

Note

other heating capacities from 200 W up available on request

Product Variants

Art. No.	Connection casing	Casing	Productname	Series	Heating element	Heater body	Model	Axial fan	Operating voltage	Operating voltage max.	Operating voltage min.	Voltage type	Frequency	Heating capacity	Inrush current max.	Surface temperature	Rec. pre-fuse T (time-delay)	Connection	Connection PE	Air outlet temperature	Switch-off temperature	Switch-off temperature 2	Switch-on temperature	Switch-on temperature 2	Drilling template	Operating temperature	Flow rate, free flow	Flow rate, with filter	Setting range	Setting range 2	Current consumption	Nominal current of socket	Power consumption	Average noise level	Enclosure cut-out	Enclosure cut-out	Storage temperature	Storage humidity	Ambient temperature	Operating humidity	Speed	Switching capacity max.	Switching current min.	Load resistance (external)	External Sensor	Measuring range	Measuring range 2	Note	Note 2	Note 3	Note 4	Reaction time	Contact type	Service life	Operation indicator	Control contact - Signal current	Electrical protection	Switch	Socket	Material	Material sealing	Air permeability	Mounting	Air intake/Air outlet	Filter material	Measuring signal	Switch temperature difference	Lamp type	Luminous flux	Light colour	Length / Depth	Width	Height	Diameter	Installation depth	Fitting position	Mounting frame	Weight	Sensor element	Protection class	Protection type	Protection type UL	VDE	UL	EAC	METRO	ATEX	Ex Protection type Gases	Ex Protection type Mine applications	Ex Protection type Dusts	Temperature class	Temperature safety cut-out	Accessory	Accessory 2	Accessory 3	Accessory 4	Art. No. Accessory	Art. No. Accessory 2	Art. No. Accessory 3	Art. No. Accessory 4	Catalogue Article	CAD	Inquiry	CAD
03051.0-00		plastic according to UL94 V-0, black	Enclosure heater with fan	CR 030	high performance cartridge	extruded aluminium profile		160 m³/h	230 V	253 V	207 V	AC	50/60 Hz	950 W			6.3 A	2-pole max. 2.5 mm², clamping screw with strain relief, torque 0.8 Nm max.								-45 ─ +70 °C			0 ─ +60 °C		4.13 A						-45 ─ +70 °C	≤90% rF		≤90% rF								fan heater with thermostat	other heating capacities from 200 W up available on request					>50.000 h									Screw fixing				7 K ± 4 K				168 mm	145 mm	100 mm			vertical airflow (air outlet up)		1.4 kg		II	IP20		VDE	E234324	EAC							with automatic reset and second-tier one shot fuse to protect against overheating in case of fan failure									Catalogue
03059.9-00		plastic according to UL94 V-0, black	Enclosure heater with fan	CR 030	high performance cartridge	extruded aluminium profile		160 m³/h	120 V	132 V	108 V	AC	50/60 Hz	950 W			10.0 A	2-pole max. 2.5 mm², clamping screw with strain relief, torque 0.8 Nm max.								-45 ─ +70 °C			+32 ─ +140 °F		7.92 A						-45 ─ +70 °C	≤90% rF		≤90% rF								fan heater with thermostat	other heating capacities from 200 W up available on request	Tolerance ±4 K				>50.000 h									Screw fixing				7 K				168 mm	145 mm	100 mm			vertical airflow (air outlet up)		1.4 kg		II	IP20			E234324	EAC							with automatic reset and second-tier one shot fuse to protect against overheating in case of fan failure									Catalogue

Notice: Setting range switch temperature difference 7K (+4K tolerance)

Summary of your request

Art. No.	Connection casing	Casing	Productname	Series	Heating element	Heater body	Model	Axial fan	Operating voltage	Operating voltage max.	Operating voltage min.	Voltage type	Frequency	Heating capacity	Inrush current max.	Surface temperature	Rec. pre-fuse T (time-delay)	Connection	Connection PE	Air outlet temperature	Switch-off temperature	Switch-off temperature 2	Switch-on temperature	Switch-on temperature 2	Drilling template	Operating temperature	Flow rate, free flow	Flow rate, with filter	Setting range	Setting range 2	Current consumption	Nominal current of socket	Power consumption	Average noise level	Enclosure cut-out	Enclosure cut-out	Storage temperature	Storage humidity	Ambient temperature	Operating humidity	Speed	Switching capacity max.	Switching current min.	Load resistance (external)	External Sensor	Measuring range	Measuring range 2	Note	Note 2	Note 3	Note 4	Reaction time	Contact type	Service life	Operation indicator	Control contact - Signal current	Electrical protection	Switch	Socket	Material	Material sealing	Air permeability	Mounting	Air intake/Air outlet	Filter material	Measuring signal	Switch temperature difference	Lamp type	Luminous flux	Light colour	Length / Depth	Width	Height	Diameter	Installation depth	Fitting position	Mounting frame	Weight	Sensor element	Protection class	Protection type	Protection type UL	VDE	UL	EAC	METRO	ATEX	Ex Protection type Gases	Ex Protection type Mine applications	Ex Protection type Dusts	Temperature class	Temperature safety cut-out	Accessory	Accessory 2	Accessory 3	Accessory 4	Art. No. Accessory	Art. No. Accessory 2	Art. No. Accessory 3	Art. No. Accessory 4	Catalogue Article	CAD

Send your selected items as an enquiry

Certificates

Heating_CR030_130_CS030_130_EU_Conformity

CR030_CR130_CS030_CS130_IEC_CBTest

CR030_CR130_CS030_CS130_VDE

Your product inquiry

Everything from one source

SUITABLE PRODUCTS

Regulating

Create the perfect climatic conditions using temperature and humidity control systems such as thermostats and hygrostats.

Accessories

We simplify thermal management for you with accessories such as sockets, components for passive ventilation and pressure equalisation devices.

CALCULATION TOOL HEATING POWER

Calculate the heating or cooling capacity required for your application to find the right product for you.