Suche
    en
    240
    STEGO enclosure heater with fan CS 032

    ENCLOSURE HEATER WITH FAN

    CS 032 | 1.000 W
    The compact enclosure heater with fan and PTC heating element helps prevent frost and condensation in enclosures and installation spaces. The plastic casing makes the heater safe to touch while in use. Quick electrical connection using cold-device plug.
    • High heating capacity with compact, slimline construction
    • Clip-mounting for 35 mm DIN rail and screw-mounting
    • User safety: plastic touch-safe casing
    to product variants

    Overview Technical Data

    PTC resistor - temperature limiting
    < +80 °C (+176 °F), except upper protective grille
    at +20 °C (+68 °F) ambient temperature
    to protect against overheating in case of fan failure,
    automatic reset
    air flow 63 m³/h, free flow
    service life 70,000 h at +25 °C (+77 °F)
    male power insert connector according to IEC320 C18
    plastic according to UL94 V-0, black
    clip for 35 mm DIN rail, EN 60715 or
    screw fixing (M5), tightening torque 2 Nm max.
    airflow direction up
    152,5 x 88 x 66 mm
    ~ 0,5 kg
    -40 to +60 °C (-40 to +140 °F) / -40 to +70 °C (-40 to +158 °F)
    < 90% RH (non-condensing)
    IP20 / II (double insulated)
    VDE, UL File No. E234324, EAC

    Important note: Connectors and cables for electrical connection are not included in the delivery. Connection cables can be ordered separately, see Accessories.

    Product Variants

    Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
    max.     		Operating voltage
    min.     		Voltage type Frequency Heating capacity Inrush current
    max.     		Surface temperature Rec. pre-fuse
    T (time-delay)     		Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
    free flow     		Flow rate,
    with filter     		Setting range Setting range 2 Current
    consumption     		Nominal current
    of socket     		Power
    consumption     		Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
    max.     		Switching current
    min.     		Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
    Signal current     		Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
    difference     		Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
    cut-out     		Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD Inquiry CAD
    03209.0-00 plastic according to UL94 V-0, black Enclosure heater with fan CS 032 PTC resistor 63 m³/h 220 - 240 V AC 50/60 Hz 1.000 W 12.0 A < +80 °C power plug according to IEC320 C18 -40 ─ +60 °C 4.55 A -40 ─ +70 °C ≤90% rF ≤90% rF >50.000 h Clip for 35 mm Rail, EN 60715 152,5 mm 66 mm 88 mm vertical airflow (air outlet up) 0.5 kg II IP20 VDE E234324 EAC to protect against overheating in case of fan failure, automatic reset Connection cable with female power insert connector according IEC320 C17, 1 m Connection cable with female power insert connector according IEC320 C17, 2 m Retaining Clip 244379 244380 237009 Catalogue
    03209.9-00 plastic according to UL94 V-0, black Enclosure heater with fan CS 032 PTC resistor 63 m³/h 100 - 120 V AC 50/60 Hz 1.000 W 18.0 A < +80 °C power plug according to IEC320 C18 -40 ─ +60 °C 10 A -40 ─ +70 °C ≤90% rF ≤90% rF >50.000 h Clip for 35 mm Rail, EN 60715 152,5 mm 66 mm 88 mm vertical airflow (air outlet up) 0.5 kg II IP20 VDE E234324 EAC to protect against overheating in case of fan failure, automatic reset Connection cable with female power insert connector according IEC320 C17, 1 m Connection cable with female power insert connector according IEC320 C17, 2 m Retaining Clip 244379 244380 237009 Catalogue
    03209.0-01 plastic according to UL94 V-0, black Enclosure heater with fan CS 032 PTC resistor 63 m³/h 220 - 240 V AC 50/60 Hz 1.000 W 12.0 A < +80 °C power plug according to IEC320 C18 -40 ─ +60 °C 4.55 A -40 ─ +70 °C ≤90% rF ≤90% rF >50.000 h Screw fixing 152,5 mm 66 mm 88 mm vertical airflow (air outlet up) 0.5 kg II IP20 VDE E234324 EAC to protect against overheating in case of fan failure, automatic reset Connection cable with female power insert connector according IEC320 C17, 1 m Connection cable with female power insert connector according IEC320 C17, 2 m Retaining Clip 244379 244380 237009 Catalogue
    03209.9-01 plastic according to UL94 V-0, black Enclosure heater with fan CS 032 PTC resistor 63 m³/h 100 - 120 V AC 50/60 Hz 1.000 W 18.0 A < +80 °C power plug according to IEC320 C18 -40 ─ +60 °C 10 A -40 ─ +70 °C ≤90% rF ≤90% rF >50.000 h Screw fixing 152,5 mm 66 mm 88 mm vertical airflow (air outlet up) 0.5 kg II IP20 VDE E234324 EAC to protect against overheating in case of fan failure, automatic reset Connection cable with female power insert connector according IEC320 C17, 1 m Connection cable with female power insert connector according IEC320 C17, 2 m Retaining Clip 244379 244380 237009 Catalogue
    Notice: Heating capacity at +25°C (+77°F) ambient temperature; Switch-off/ Switch-on temperature tolerance +5K, other switch-off and switch-on temperatures on request

    Summary of your request

    Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
    max.     		Operating voltage
    min.     		Voltage type Frequency Heating capacity Inrush current
    max.     		Surface temperature Rec. pre-fuse
    T (time-delay)     		Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
    free flow     		Flow rate,
    with filter     		Setting range Setting range 2 Current
    consumption     		Nominal current
    of socket     		Power
    consumption     		Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
    max.     		Switching current
    min.     		Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
    Signal current     		Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
    difference     		Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
    cut-out     		Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD
    Send your selected items as an enquiry

    Accessories

    Art.-No.
    Product description
    Length (L)
    244379
    Connection w/ female power insert (IEC320 C17)
    1,0 m
    244380
    Connection w/ female power insert (IEC320 C17)
    2,0 m

    Art.-No
    Product description
    237009
    Retaining clip suitable for female power insert connector on connection cable 244379 and  244380

    Your product inquiry
    Icon-Heizen Heating
    Icon-Kuehlen Cooling
    Icon-Regeln Regulating
    Icon-Beleuchten Lighting
    Start inquiry now

    Your direct contact

    +49 (0)791 95058-0
    info@stego.de

    STEGO Elektrotechnik GmbH
    Kolpingstraße 21
    74523 Schwäbisch Hall
    Germany

    Stego Worldwide

    Stego-Weltweit-Karte
    To the branches & dealers
    Start inquiry now